Palit Adds a Subdued RTX 5080 Design
Palit’s GeForce RTX 5080 Infinity 3 series has appeared as a new custom RTX 5080 option built around an all-black triple-fan cooler. The lineup includes two versions: the GeForce RTX 5080 Infinity 3 OC and the standard GeForce RTX 5080 Infinity 3.
The design is more restrained than many high-end graphics cards, with a dark shroud, three fans and no obvious bright color treatment in the supplied product images. For buyers trying to keep a black or low-profile PC build consistent, that may be the main appeal. This is still a physically large RTX 5080-class card, so case clearance matters more than the simple exterior suggests.
Listed Specifications and Card Size
The listed specifications point to the same core RTX 5080 configuration across both Infinity 3 models: 16GB of GDDR7 memory, a 256-bit memory bus and 30 Gbps memory speed. The OC model is listed with a 2625 MHz boost clock, while the standard model is listed at 2617 MHz; those figures should be treated as listing details rather than independently verified performance results.
Palit’s cooler description mentions TurboFan 4.0 fans and composite heat pipes. The company claims the fan design improves noise and thermal optimization by 33%, while the heat pipe design improves heat transfer efficiency by up to 32%, based on its own internal testing. Those are vendor claims, so real-world cooler behavior will still depend on case airflow, power limits, ambient temperature and final board tuning.
| Model | Listed boost clock | Memory | Memory bus |
|---|---|---|---|
| GeForce RTX 5080 Infinity 3 OC | 2625 MHz | 16GB GDDR7 | 256-bit |
| GeForce RTX 5080 Infinity 3 | 2617 MHz | 16GB GDDR7 | 256-bit |
The card is listed at 331.9 x 127.1 x 56.8 mm, which puts it in 2.8-slot territory, though that size has not been independently verified here. In practical terms, buyers should check GPU length, slot spacing and front-radiator clearance before treating it as a drop-in upgrade.
Lian Li LANCOOL III Airflow Case
A roomy airflow case such as the LANCOOL III gives long triple-fan GPUs more breathing room, but buyers should still verify radiator placement, front fan clearance and cable bend space before ordering.
As an Amazon Associate I earn from qualifying purchases.
Display Outputs and Power Connector
The Infinity 3 cards are listed with one HDMI 2.1b connector and three DisplayPort 2.1b outputs. That gives the card the expected modern display mix for a high-end GPU, including support for newer DisplayPort monitors, depending on final monitor and cable compatibility.
Power is handled through a single 16-pin connector, and the bus interface is listed as PCI Express 5.0 x16. For a new build, that means the card belongs in the same planning bucket as other current high-end GPUs: a suitable power supply, enough cable clearance at the side panel and a case that can handle a long, multi-slot graphics card without crowding the rest of the system.
- One HDMI 2.1b output
- Three DisplayPort 2.1b outputs
- One 16-pin power connector
- PCI Express 5.0 x16 interface
- Listed 2.8-slot cooler thickness
What This Means for Buyers
The Infinity 3 series looks less like a radical new board strategy and more like another RTX 5080 option for buyers who want a black triple-fan card from Palit. A firm timeline for related future products has not been publicly confirmed, and the details here should be read as product-listing information rather than a full independent review.
That distinction matters. The cooler claims sound promising on paper, but they do not replace measured noise, temperature and power data. The small listed clock gap between the OC and non-OC models also suggests that cooler quality, price and availability may matter more than the factory boost difference for many buyers.
Corsair RM1000x SHIFT 1000W PSU
For an RTX 5080-class build, look for a quality ATX 3.x power supply with native 12V-2×6 or 12VHPWR support and enough room for the cable path inside the case.
As an Amazon Associate I earn from qualifying purchases.
For anyone considering this card, the main checklist is straightforward: confirm the exact SKU, compare local pricing against other RTX 5080 models, check warranty terms and make sure the 331.9 mm listed length works with the case. If the price lands close to louder or flashier alternatives, the all-black design could be a useful differentiator for clean workstation-style builds.